what size push rods??
Thread Starter
Racer
Joined: Aug 2006
Posts: 404
Likes: 0
From: Napa Ca
what size push rods??
Installing a G5X3@112LSA, with ls1 heads that have a mild port, patriot valvesprings .650 lift springs, titanium retainers, and new seals i know im gunna hve to upgrade the push rods so which ones?? Oh and anything else u guys may think of...
Burning Brakes
Joined: Aug 2006
Posts: 789
Likes: 38
From: Shreveport LA
Originally Posted by blackc598
Installing a G5X3@112LSA, with ls1 heads that have a mild port, patriot valvesprings .650 lift springs, titanium retainers, and new seals i know im gunna hve to upgrade the push rods so which ones?? Oh and anything else u guys may think of...
Make sure that you use lock tight on the timing chain gear bolts.
Team Owner
Joined: Mar 1999
Posts: 22,025
Likes: 192
From: At the beach in little Rhody
If you keep 7.4's, be prepared for a noisy valve train. Get the new base circle from LG and use that to determine the additional length you will need in your pushrods. Likely 7.425", but run the numbers.
