squeaky shifter
Thread Starter
Melting Slicks
Joined: Aug 2003
Posts: 2,786
Likes: 7
From: Iowa
squeaky shifter
I just noticed my shifter (Stock) has developed a squeak when moving from the center position to the right to access 5th, 6th, and reverse. the sound is coming from the shifter itself, is there something I can grease to make it go away?
Thread Starter
Melting Slicks
Joined: Aug 2003
Posts: 2,786
Likes: 7
From: Iowa
Thread Starter
Melting Slicks
Joined: Aug 2003
Posts: 2,786
Likes: 7
From: Iowa
there's a little pin on the shifter, I think I read that its to keep something aligned when the shifter is removed? do I have to be worried about getting it back in properly? I have the service manuals, I guess I'll just follow the instructions.
Tech Contributor
Joined: Dec 1999
Posts: 32,910
Likes: 2,402
From: Anthony TX
CI 6,7,8,9,11 Vet
St. Jude Donor '08
Here is what your going to see when you remove the top plate:
The pin is used to insure that the BOX is in the proper NEUTRAL position when the tranny is in the true NEUTRAL position. You can insert the pin once the tranny is in nuteral and if it wont fit, move the box until it does.
It should fit fine.
Use any snthetic grease or lithium grease. Apply it to the rodm fork and black pivot ball.
Have you ever considered a new shifter?? I LOVE my Kirban!
Stock shifter
Stock vrs KIRBAN
Make sure that you grease the ball on the end and the one inside the housing also:
The pin is used to insure that the BOX is in the proper NEUTRAL position when the tranny is in the true NEUTRAL position. You can insert the pin once the tranny is in nuteral and if it wont fit, move the box until it does.
It should fit fine.
Use any snthetic grease or lithium grease. Apply it to the rodm fork and black pivot ball.
Have you ever considered a new shifter?? I LOVE my Kirban!
Stock shifter
Stock vrs KIRBAN
Make sure that you grease the ball on the end and the one inside the housing also:
Thread Starter
Melting Slicks
Joined: Aug 2003
Posts: 2,786
Likes: 7
From: Iowa
thanks Bill!
I have considered a aftermarket shifter but I haven't found one that I like yet. I want something with a shorter throw than stock but I want one that is a straight shifter and not bent like the Z06 one. I also want something which isn't going to be any stiffer than stock. a C5 is a performance car but mine is also a daily driver, I want it to be easy and comfortable to drive. I've heard alot of good things about the Kirban before...do you think it would be good for me?
I have considered a aftermarket shifter but I haven't found one that I like yet. I want something with a shorter throw than stock but I want one that is a straight shifter and not bent like the Z06 one. I also want something which isn't going to be any stiffer than stock. a C5 is a performance car but mine is also a daily driver, I want it to be easy and comfortable to drive. I've heard alot of good things about the Kirban before...do you think it would be good for me?
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
5 MOST and 5 LEAST Popular Corvette Model Years in History!
Joe Kucinski
Tech Contributor
Joined: Dec 1999
Posts: 32,910
Likes: 2,402
From: Anthony TX
CI 6,7,8,9,11 Vet
St. Jude Donor '08
thanks Bill!
I have considered a aftermarket shifter but I haven't found one that I like yet. I want something with a shorter throw than stock but I want one that is a straight shifter and not bent like the Z06 one. I also want something which isn't going to be any stiffer than stock. a C5 is a performance car but mine is also a daily driver, I want it to be easy and comfortable to drive. I've heard alot of good things about the Kirban before...do you think it would be good for me?
I have considered a aftermarket shifter but I haven't found one that I like yet. I want something with a shorter throw than stock but I want one that is a straight shifter and not bent like the Z06 one. I also want something which isn't going to be any stiffer than stock. a C5 is a performance car but mine is also a daily driver, I want it to be easy and comfortable to drive. I've heard alot of good things about the Kirban before...do you think it would be good for me?
The KIRBAN is a spring assisted BUT, to me is not all that stiff. I agree, find one that you can test in a C5 and if you like it, get it!
The only one that I know that is ergonomic and bent to feel good and not spring assisted is the stock C6 shifter. I have to admit, when I drive my wifes C6,,,,
I like her stock shifter. Give one of those a try. There everywhere. Stop by a dealer and check out a new C6 with a manual in it.Bill
Le Mans Master
Joined: Sep 2003
Posts: 8,847
Likes: 795
From: Longview Texas
Bill,
When you tested the stock C6 shifter in your C5, was it as good as the feel of the shifter in a C6Z06?
I had heard that most of the improvement in the feel of the C6 shifter was due to changes within the transmission.
When you tested the stock C6 shifter in your C5, was it as good as the feel of the shifter in a C6Z06?
I had heard that most of the improvement in the feel of the C6 shifter was due to changes within the transmission.
Le Mans Master
Joined: Sep 2003
Posts: 8,847
Likes: 795
From: Longview Texas
