electrical
Thread Starter
Cruising
Joined: Jun 2004
Posts: 12
Likes: 0
From: saugus ma
electrical
Hi,,,, just got a 2000 coupe with 112000,,,, very happy with it,,, just a couple issues
electrical,,, tail lights and instrument lights only work if twilight function is on,,,
also,, traction control and service engine soon,,, thoughts?
and sometimes blinkers dont work
thanks
darold
electrical,,, tail lights and instrument lights only work if twilight function is on,,,
also,, traction control and service engine soon,,, thoughts?
and sometimes blinkers dont work
thanks
darold
Le Mans Master
Joined: Mar 2011
Posts: 6,835
Likes: 302
From: Columbia SC
Your light issues make me think the Multifunction (MF) switch may be the issue.
When you say turn signals do you mean you are having issues with the Left and Right or just one side? If both sides then the Hazard switch is the issue. If one side only it should be an MF issue.
When you say turn signals do you mean you are having issues with the Left and Right or just one side? If both sides then the Hazard switch is the issue. If one side only it should be an MF issue.
Thread Starter
Cruising
Joined: Jun 2004
Posts: 12
Likes: 0
From: saugus ma
Your light issues make me think the Multifunction (MF) switch may be the issue.
When you say turn signals do you mean you are having issues with the Left and Right or just one side? If both sides then the Hazard switch is the issue. If one side only it should be an MF issue.
When you say turn signals do you mean you are having issues with the Left and Right or just one side? If both sides then the Hazard switch is the issue. If one side only it should be an MF issue.
Drifting
Joined: Feb 2008
Posts: 1,596
Likes: 67
From: Bahama North Carolina
What about your tail lights and instrument lights. The hazard switch isn't going to affect them. If every thing works with twilight sentinel (except the turn signals) then I would look at replacing the multifunction switch. You need to pull the codes!
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Le Mans Master
Joined: Mar 2011
Posts: 6,835
Likes: 302
From: Columbia SC
Your first 3 codes are related to the driver door.
B2578 and B2583 are related to the turn signal circuits. It is saying that it detects you have turned on a turn signal circuit but there is no pulsing of the voltage. This could be a Hazard switch flasher issue or an internal problem with the MF switch.
Based on the other issues with lights you could replace the MF switch first and see what that fixes. It certainly looks like the MF switch has issues for sure.
Now if you can perform electrical diagnostics then I can provide all the FSM info to figure out if it is the MF switch , Hazard switch, or another circuit issue.
If you need DIY on replacing the MF switch, here it is. Some people try to take it apart and try to resolve their issues.
https://www.corvetteforum.com/forums...-a-how-to.html
The last code is related to the Theft Deterrent system and fuel shutoff.
You can try deleting your codes and see if any come back. You never told us if they were H or C. If you turn the ignition OFF and then pull the codes they will almost all show as H.
B2578 and B2583 are related to the turn signal circuits. It is saying that it detects you have turned on a turn signal circuit but there is no pulsing of the voltage. This could be a Hazard switch flasher issue or an internal problem with the MF switch.
Based on the other issues with lights you could replace the MF switch first and see what that fixes. It certainly looks like the MF switch has issues for sure.
Now if you can perform electrical diagnostics then I can provide all the FSM info to figure out if it is the MF switch , Hazard switch, or another circuit issue.
If you need DIY on replacing the MF switch, here it is. Some people try to take it apart and try to resolve their issues.
https://www.corvetteforum.com/forums...-a-how-to.html
The last code is related to the Theft Deterrent system and fuel shutoff.
You can try deleting your codes and see if any come back. You never told us if they were H or C. If you turn the ignition OFF and then pull the codes they will almost all show as H.
Le Mans Master
Joined: Mar 2011
Posts: 6,835
Likes: 302
From: Columbia SC
Your statement is true. I was just keying in on once your turn the ignition OFF then most all codes you later pull will show as H. Would have been better to say pull codes BEFORE you turn the ignition OFF which is what I normally say. But I'm not entirely normal, you should know that.
Thanks again Chuck.
Thanks again Chuck.