SuperVettes rear diffuser problem
Thread Starter
Racer
Joined: Sep 2012
Posts: 488
Likes: 18
From: Poughkeepsie NY
SuperVettes rear diffuser problem
So, I having some trouble installing the supervette rear diffuser. I was told besides trimming some of the liner it will fit right on, but its not. As you can see in the picture its hitting the sway bar area(bolt) even tried moving it upward still hits the top. So I trimmed about 3inch off and still looks like I need at least another inch or two. Not happy about trimming something as expensive as this was. Has anyone else run into this problem?? Is there something I did wrong. I evened tried using two people and every way we tried kept hitting the sway bar area 
Thanks!
Thanks!
Melting Slicks
Joined: Oct 2011
Posts: 2,992
Likes: 394
From: Naples FL
2023 C6 of the Year Finalist - Modified
2022 C6 of the Year Finalist - Modified
2021 C6 of the Year Finalist - Modified
2020 C6 of the Year Finalist - Modified
2015 C6 of Year Finalist
I have they're quad exhaust diffuser and the only trimming that needed done was for the exhaust tips. Everything else fit perfect. 2006 Z06
Melting Slicks
Joined: Dec 2013
Posts: 2,237
Likes: 220
From: Akron Ohio
2017 Corvette of Year Finalist
2016 C5 of Year Finalist
I have the SS Vette diffuser, and while they are slightly different the fit is the same. my diffuser fits over and covers the sway bar, from your pic it looks like your sway bar is angled wrong, the curve shoud point towards the rear of the car not to the ground.
Melting Slicks
Joined: Oct 2011
Posts: 2,992
Likes: 394
From: Naples FL
2023 C6 of the Year Finalist - Modified
2022 C6 of the Year Finalist - Modified
2021 C6 of the Year Finalist - Modified
2020 C6 of the Year Finalist - Modified
2015 C6 of Year Finalist
Thread Starter
Racer
Joined: Sep 2012
Posts: 488
Likes: 18
From: Poughkeepsie NY
thanks I wondered how it got like that? Never touched it! Although I think it will still hit bolts I'll give it a try
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
5 MOST and 5 LEAST Popular Corvette Model Years in History!
Joe Kucinski
2027 Corvette Buyer's Guide: Everything You Need to Know!
Joe Kucinski
Melting Slicks
Joined: Dec 2013
Posts: 2,237
Likes: 220
From: Akron Ohio
2017 Corvette of Year Finalist
2016 C5 of Year Finalist
Instructor
Joined: Nov 2015
Posts: 199
Likes: 43
From: Dallas, TX
My sway bar also point down just like your (just step out to garage to check it) so I don't think it installed wrong. I think you should call up Supervettes to see where should you mount that bottom portion. Even if you trim it to clear that bolt, where would you mount it to? I have a different brand diffuser and it sit below the sway bar, below that bolt.
Thread Starter
Racer
Joined: Sep 2012
Posts: 488
Likes: 18
From: Poughkeepsie NY
Yes, bought the car used. It is the z51 so it does have the bigger sway bars. I just bought johnny oconnell so it's gonna be even bigger. From the pic on google of the sway bar it looks like it's installed right?? I'll have to contact supervettes I guess...
Instructor
Joined: Sep 2016
Posts: 215
Likes: 45
From: Michigan
Melting Slicks
Joined: Oct 2011
Posts: 2,992
Likes: 394
From: Naples FL
2023 C6 of the Year Finalist - Modified
2022 C6 of the Year Finalist - Modified
2021 C6 of the Year Finalist - Modified
2020 C6 of the Year Finalist - Modified
2015 C6 of Year Finalist
Instructor
Joined: Sep 2016
Posts: 215
Likes: 45
From: Michigan
Thread Starter
Racer
Joined: Sep 2012
Posts: 488
Likes: 18
From: Poughkeepsie NY
thanks