Tech 2 issues/ missing special features
so unfortunately I've forgotten the errors/trials etc I went through. Wish I had a better response. I do remember that I read at least 50 articles on slightly different procedures until I stumbled on the one that worked for me.
anyways.... hope you find your solution sooner than later 👍
To get to BCM data menu for BPS relearn (or any other BCM type needs) for 06~12 C6, use 2013 as the year of the car in the tech2 win set up.
Note, If car is 2005, then use 2005.
Anything other module needs for 06~12 c6, just use the correct year when you go into Tech2win they will work as needed.
So North America, mdi1, UBS device with nano plugged in for the 3 pop up screens before you get to the tech2win blue screen, then diag, 2013, passenger car, chev, Y body type, then select the needed part of the car to get you to the BPS relearn selection.
Last edited by Dano523; Dec 18, 2023 at 12:21 AM.








