This is what worked for me, it differs from GM\’s official instructions. This is for a minor adjustment and assumes a course adjustment has already been made. This may be different for a 2000 or later. You\’ll need a 2mm Allen wrench and a T30 Torx driver. If you have an old roof which is […] More »

Please note: I installed a C5 rolled exhaust plate from Xtreme Motorsports. I am confident that this tech tip will work for others as well, but check measurments first to be sure. Sorry there are no pics, my sister borrowed my digital camera. One other tip: Don\’t say to yourself \”this would be a great […] More »

There is a opening at the lower bearing where you can inject lithium grease. This will eliminate the rubbing or squeaking noise when the steering wheel is turned.

Maker Series Model Tread Walls MPH 245/45ZR17 275/40ZR18 Bridgestone Potenza S – 02 Pole 180 AA-A 186 $250 $350 Pirelli System P Zero 140 A-A 200 $250 $350 Michelin Pilot Sport 220 A-A 186 $249 $247 BF Goodrich G Force T/A KD SSS 200 AA-A 186 $252 $336 Goodyear Runflat F1 GS EMT 300 AA-A […] More »

The stock Corvette exhaust system works well and sounds pretty good. Actually, it’s sounds polite and politically correct. From my first test drive, I thought that the exhaust note was a little weak, even under wide open throttle. Heck, my Mustang’s stock exhaust (gasp!) had more grunt. Not being a civilized type of person, I […] More »

Please note that this process was written by C5-TECH. Since there was not a tech tip for the C5 yet and the overwhelming response to a thread I posted regarding this issue…I thought you all could benefit from the pictures of my decarb. 1. Disconnect the pcv line by the throttle body and insert a […] More »

Here is the Donaldson Blackwing install for a 2001. I did not see anyone go into detail on installing one so I thought I may as well post some pics as I went. You all know what the stock cleaner looks like so I am skipping that one. The first one is a picture of […] More »