When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Looks good! That's a lot of tire to fit under the stock fenders. What width wheels are you going with and how much backspace are you going to wind up with?
They are 9.5" wide with an offset of 25mm. I will be using custom lug/hubcentric adapters that will be around 1". I still have to fine tune it to get them exactly where I want them. Ill probably have to trim the fender lip to prevent rub on full lock/compression
Hey David,
Those look great on your car!!
I just responded to your PM a few minutes ago asking if you had posted any pics yet. I hadn't seen this post at that time.
9.5" wide wheel with +25mm offset and a 15/16" spacer up front=??
Figure +25 offset would make for approximately 5.75" backspace - ~1" for the spacer so 4.75" backspace? These are pushed out a bit further than my 17x8 with 4" backspace so it makes sense
These 18" wheels really bring these beautiful cars to a whole new level! Very envious of you guys.
I'm still looking for my dream chrome bumper and planned on upgrading to 18" or 19" myself.
Please keep the pics coming!
From: Graceland in a Not Correctly Restored Stingray
Originally Posted by vette427-sbc
9.5" wide wheel with +25mm offset and a 15/16" spacer up front=??
Figure +25 offset would make for approximately 5.75" backspace - ~1" for the spacer so 4.75" backspace? These are pushed out a bit further than my 17x8 with 4" backspace so it makes sense
According to my conversions, unless I've missed it, a +25mm offset on 9.5" wheels should be ~6.23" BS, minus 15/16" spacer, yielding effectively ~5.29" BS, which would sit them ~0.21" further out than 8's w/4" BS.
In any event, your combination certainly fits very nicely.
Last edited by TheSkunkWorks; Jun 19, 2012 at 03:29 PM.