A lot of nice stuff! 
Z Reborn
Thread Starter
Supremacy 1 car at a time
Joined: Jul 2006
Posts: 1,683
Likes: 0
From: West Chester Pa
All the parts ive ordered for the past 2 weeks got held up because of the holidays and ive recieved 7 emails telling me my various parts will show up in the next couple days, my goal is to one day have a UPS truck just for my stuff.
Got this today though
Got this today though
Night Owl for life
Joined: Nov 2003
Posts: 24,725
Likes: 4,564
From: Bugs Bunny should'a made a left turn here
any decision made about the flares vs tub?
i just ordered the flares because i love how it looks.
i also already have the c6z splash guards so it will prevent the sandblasting effect.
i just ordered the flares because i love how it looks.
i also already have the c6z splash guards so it will prevent the sandblasting effect.
Thread Starter
Supremacy 1 car at a time
Joined: Jul 2006
Posts: 1,683
Likes: 0
From: West Chester Pa
The offset of the wheels allows me to run them without having to tub them and im going to see how far they stick out before deciding on the flares.
I got the bar from pfadtracing.com
I got the bar from pfadtracing.com
Last edited by BaneZ06; Dec 29, 2006 at 05:50 PM.
Thread Starter
Supremacy 1 car at a time
Joined: Jul 2006
Posts: 1,683
Likes: 0
From: West Chester Pa
9 hours of wrenching
Car is 90% completed
Only things left are fuel and igniton hook up, mount the intake manifold and hook up the exhaust and hook up vacuum pump
Ram dual disc
1" valve cover spacers required modification to other parts like taking a piece of the alternator case off but nothing to bad
Oh thats where thats stuff goes
Say hi to Tim
WHAT YOU THINK ABOUT THIS
OR HOW ABOUT THIS 100MMs of goodness
This thing is gonna breathe deep
Say hi to Mike
Had to take a piece out of the cowl and piece out of the hood for the manifold to fit
Should be finished up tommorrow and gets dynoed this week
Stay tuned...
Car is 90% completed
Only things left are fuel and igniton hook up, mount the intake manifold and hook up the exhaust and hook up vacuum pump
Ram dual disc
1" valve cover spacers required modification to other parts like taking a piece of the alternator case off but nothing to bad
Oh thats where thats stuff goes
Say hi to Tim
WHAT YOU THINK ABOUT THIS
OR HOW ABOUT THIS 100MMs of goodness
This thing is gonna breathe deep
Say hi to Mike
Had to take a piece out of the cowl and piece out of the hood for the manifold to fit
Should be finished up tommorrow and gets dynoed this week
Stay tuned...
Last edited by BaneZ06; Dec 29, 2006 at 06:02 PM.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Race Director
Joined: May 2005
Posts: 15,960
Likes: 21
From: West Norriton PA
St. Jude Donor '08
Damn that intake looks radical.
Have got the roll cage in yet. I am interested in how they fit up. I bought some Corbeau LG1 Seats and need to see the fitment of these and the seats.
Seats should be here in about six weeks (custom order) in two tone leather.
Have got the roll cage in yet. I am interested in how they fit up. I bought some Corbeau LG1 Seats and need to see the fitment of these and the seats.
Seats should be here in about six weeks (custom order) in two tone leather.
Thread Starter
Supremacy 1 car at a time
Joined: Jul 2006
Posts: 1,683
Likes: 0
From: West Chester Pa
Its alive
This vid is the engines first start , still needs some last couple things and it will be all ready to hit the dyno. If all goes well ill have some numbers this week and some street vids.
http://www.youtube.com/watch?v=bNkm0RifbOQ
This vid is the engines first start
, still needs some last couple things and it will be all ready to hit the dyno. If all goes well ill have some numbers this week and some street vids.http://www.youtube.com/watch?v=bNkm0RifbOQ
Last edited by BaneZ06; Jan 1, 2007 at 02:41 PM.