ebay Header Install
Racer
Joined: Aug 2006
Posts: 345
Likes: 0
From: Lake City AR
So with wat they send in the kit everything is there needed to hook up to aftermarket mufflers if your not gonna run cats? How much is the new kit? Also how do you get in contact with them there is no # on thier website
Safety Car
Joined: Apr 2003
Posts: 3,968
Likes: 0
From: Biloxi MS Theres something happenin' here, What it is ain't exactly clear.....
This is what ya get for $400 shipped (just make sure to tell them you are ordering the TimStar/Corvette Forum C5 Header & Xpipe package.
http://forums.corvetteforum.com/show...&postcount=413
You will need new header gaskets (if you choose), clamps unless you plan on welding, and a reducer pipe to go from 3" to 2.5".
I will PM you the ordering and contact info.
Rain
http://forums.corvetteforum.com/show...&postcount=413
You will need new header gaskets (if you choose), clamps unless you plan on welding, and a reducer pipe to go from 3" to 2.5".
I will PM you the ordering and contact info.
Rain
Pro
Joined: May 2006
Posts: 723
Likes: 0
From: MOTOWN / Fort Dix NJ MI
they have them I ordered on monday and they shipped on tuesday so they are there but I believe since they sell Ricer Turbo kits very cheap they are overwhelmed with ricer questions they don't answer their emails very fast
Racer
Joined: Aug 2006
Posts: 345
Likes: 0
From: Lake City AR
LightFighter how did you order your kit? Did they send you a conformation # an tracking #? Just a little nervous about placing a order with a company I can't call and talk to. Also where are you guys getting your 02 extenders?
Safety Car
Joined: Apr 2003
Posts: 3,968
Likes: 0
From: Biloxi MS Theres something happenin' here, What it is ain't exactly clear.....
Mine arrived today -
Avg sized box.
Haven't had time to open it and check em out -
Gotta clean up after work (and VetteCommittee meeting and dinner) - then I'll crack the box open and snap some pics for yall.
it took a day or two after I ordered before I got a Tracking Number (FEDEX).. but i was the first one to order - so I think I was the initial confusion in the shipping / sales dept that Tim mentioned a few posts back.
Rain
Avg sized box.
Haven't had time to open it and check em out -
Gotta clean up after work (and VetteCommittee meeting and dinner) - then I'll crack the box open and snap some pics for yall.
it took a day or two after I ordered before I got a Tracking Number (FEDEX).. but i was the first one to order - so I think I was the initial confusion in the shipping / sales dept that Tim mentioned a few posts back.
Rain
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Le Mans Master
Joined: May 2006
Posts: 5,987
Likes: 18
From: DuBois PA
St. Jude Donor '11-'12-'13-'14-'15
O2 Options
Most are deleting the rear O2s. I believe you can re-route the front O2s to make it to the new Header location and the rears should fit as they are… Not 100% sure.
Anyone out there know for sure?
Anyone out there know for sure?
Thread Starter
Le Mans Master
Joined: Jun 2004
Posts: 6,269
Likes: 50
From: Dallas Texas
St. Jude Donor '06-'07-'09-'10
I used short 12" O2 extensions on the original style header install, because I wasn't sure about the location. With the new relocated bungs, you may not need them, but you can always send them back if you don't. The rears are definitely OK as they are.
Pro
Joined: May 2006
Posts: 723
Likes: 0
From: MOTOWN / Fort Dix NJ MI
RIP
I ordered on monday with Paypal and I got a confirm email, then a Shipped email later that day with a tracking number
I might order another set and put them on my TBSS, or make myself a turbo kit from their site for the TBSS...they got turbo LSx headers to
I ordered on monday with Paypal and I got a confirm email, then a Shipped email later that day with a tracking number
I might order another set and put them on my TBSS, or make myself a turbo kit from their site for the TBSS...they got turbo LSx headers to
Le Mans Master
Joined: May 2006
Posts: 5,987
Likes: 18
From: DuBois PA
St. Jude Donor '11-'12-'13-'14-'15
I’m actually on the fence about the rear O2s, I better get off cause I’m installing this Saturday! I’d have to add bungs to my Cats. NO biggy after drilling for the AIR tubes.
Speaking of bungs, the Header’s O2 bung is now very close to the end of the Header, making for minimal contact area for the Cats. I’m thinking of slotting my band clamps for the bungs so they can slide further up the header. I’m just not sure if that would destroy the clamps integrity or not… IF I can find clamps locally, I’ll try one and post the results.
I’m going to throw this out there to the Forum… I’m working with them on developing a few more products, same quality and pricing (LOW);
I need help with one of the products. Does anyone have a used Corsa Indy Pace with Pro Tips????
Email me if you would SERIOUSLY buy a Twin Turbo System if the price were right. Keep in mind that the tune would be your responsibility ect…, pretty much the same customer support we’re getting now with the Headers…
Last edited by tstar; Mar 30, 2007 at 01:12 AM.
Le Mans Master
Joined: May 2006
Posts: 5,987
Likes: 18
From: DuBois PA
St. Jude Donor '11-'12-'13-'14-'15
Le Mans Master
Joined: May 2006
Posts: 5,987
Likes: 18
From: DuBois PA
St. Jude Donor '11-'12-'13-'14-'15
I forgot to ask where you got them, for those wanting them...
Safety Car
Joined: Apr 2003
Posts: 3,968
Likes: 0
From: Biloxi MS Theres something happenin' here, What it is ain't exactly clear.....
OK
BOX IS......
.
.
.
.
.
.
.
.
.
.
.
.
.
.
OPEN!!!!!
Tim - My box has two metal gaskets(for Xpipe), two U clamps/brackets, two (only 2?) bolts/nuts/washers as well as the AIR tubes.
pics in a flash
Rain
BOX IS......
.
.
.
.
.
.
.
.
.
.
.
.
.
.
OPEN!!!!!
Tim - My box has two metal gaskets(for Xpipe), two U clamps/brackets, two (only 2?) bolts/nuts/washers as well as the AIR tubes.
pics in a flash
Rain
Le Mans Master
Joined: May 2006
Posts: 5,987
Likes: 18
From: DuBois PA
St. Jude Donor '11-'12-'13-'14-'15
SA!!!! You actually caught me on that one! my window was above the "OPEN" and I had to scroll down!OK cool!!!! AIR tubes included!
Purdy aren't they??????????
Safety Car
Joined: Apr 2003
Posts: 3,968
Likes: 0
From: Biloxi MS Theres something happenin' here, What it is ain't exactly clear.....
Dave asked a good question on AIM.
Can the useless coupler (headers to cats) be cut and re welded to the proper width?
with the Xpipe being staggered, is this even worth trying?
Can the useless coupler (headers to cats) be cut and re welded to the proper width?
with the Xpipe being staggered, is this even worth trying?
