C6 1/4 Mile Performance Challenge
Safety Car
Joined: Jun 2005
Posts: 4,905
Likes: 569
From: Bucks County PA
CONGRATS LS1LT1
I'll say it again, you can't beat the A6s at the track.
Great air yesterday combined with an experienced driver who keeps the car PERFECTLY STRAIGHT going down the track adds up to the FASTEST SHOWROOM STOCK C6.
Lots of people discount how much a good driver helps, even with an automatic.
A lot of people jerk the wheel a tiny bit when the car shifts and that costs time and mph, LS1LT1 knows what he is doing.
Howard
I'll say it again, you can't beat the A6s at the track.
Great air yesterday combined with an experienced driver who keeps the car PERFECTLY STRAIGHT going down the track adds up to the FASTEST SHOWROOM STOCK C6.
Lots of people discount how much a good driver helps, even with an automatic.
A lot of people jerk the wheel a tiny bit when the car shifts and that costs time and mph, LS1LT1 knows what he is doing.
Howard
Le Mans Master
Joined: Feb 2006
Posts: 5,762
Likes: 4
From: Chandler Arizona
Originally Posted by LS1LT1
Tommy, please update my times (and place 
) on the list when you have a chance, still a stock A6.
12.21@115.45
Thank you
) on the list when you have a chance, still a stock A6.12.21@115.45
Thank you
Thanks,
Glenn
Le Mans Master
Joined: Aug 2004
Posts: 5,259
Likes: 16
From: Monroe Township New Jersey
St. Jude Donor '05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16
St. Jude donor in memory of jpee '14
Season Greetings To Everyone!
We had one heck of a season with new fastest times. The fun will begin next season with everyone looking to run down the leaders, good luck to everbody and have a safe & joyous holiday season
Tommy
We had one heck of a season with new fastest times.
The fun will begin next season with everyone looking to run down the leaders, good luck to everbody and have a safe & joyous holiday seasonTommy
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Team Owner
Joined: Jun 2001
Posts: 26,714
Likes: 344
From: Houston, TX
Safety Car
Joined: Jun 2005
Posts: 4,905
Likes: 569
From: Bucks County PA
Tommy -
Happy Holidays and an extra special thanks to you for all the hard work for our benefit
We need to see some more Magnacharged A6 times
Just kidding, my wife would kill me, but I am thinking about it.
Howard
Happy Holidays and an extra special thanks to you for all the hard work for our benefit
We need to see some more Magnacharged A6 times
Just kidding, my wife would kill me, but I am thinking about it.
Howard
Team Owner
Joined: Aug 2003
Posts: 38,314
Likes: 35
Le Mans Master
Joined: Aug 2004
Posts: 5,259
Likes: 16
From: Monroe Township New Jersey
St. Jude Donor '05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16
St. Jude donor in memory of jpee '14
Hey thanks guys ! Heres to a healthy & happy new year. I might as well type it now because I have to close the year end & then tax season begins 
Imagine, I actually have to work at work, what is this world comming to!
Howard, it is a sickness
..... Thank God Joey has been keepng me busy with new parts arriving ...... mufflers, cai, shifter, x-pipe, Z06spoiler & rims and his car is only one month old so I don't have time to even look at parts for my car 
I think we all need to start therapy for AMS Automobile Modification Syndrome
I might as well type it now because I have to close the year end & then tax season begins Imagine, I actually have to work at work, what is this world comming to!Howard, it is a sickness
..... Thank God Joey has been keepng me busy with new parts arriving ...... mufflers, cai, shifter, x-pipe, Z06spoiler & rims and his car is only one month old so I don't have time to even look at parts for my car I think we all need to start therapy for AMS Automobile Modification Syndrome
Burning Brakes
Joined: Jan 2003
Posts: 1,150
Likes: 2
From: League City tx
3 New Bests Tonight...finally figured out the DR
Well, decided to go to HRP tonight. Ill start with Conditions
56 Deg. 50 % humidity 30.24 Barometer
By my calculator, that comes out to -435 Density altitude....Not perfect, but very nice
Got there around 515 pm, to find out they open at 2pm now and close at 8, so decided I better make a bunch of runs. Car was hot lapped all night
Raceweight 3450 with me in it. Car is a 3LT 6sp Z51, only mods are Drag radials, MTI tune, and Magnaflow mufflers (weld in, not cat back)
Here are results (i think in order)
R/T 60' 330' 1/8 MPH 1000 1/4 MPH
.350 1.840 5.236 8.012 90.31 10.371 12.374 113.01
.181 1.749 5.065 7.801 91.06 10.162 12.176 112.10 hit rev 3rd
.115 1.727 5.065 7.815 91.02 10.166 12.147 113.75 new best
.094 1.862 5.210 7.955 90.62 10.302 12.284 113.37
.109 1.841 5.191 7.919 91.57 10.257 12.225 114.44
.096 1.913 5.255 7.980 91.24 10.311 12.284 113.81
.212 1.801 5.139 7.864 91.76 10.197 12.163 114.71
.118 1.744 5.065 7.776 91.93 10.112 12.083 114.35
.116 1.722 5.021 7.738 91.73 10.072 12.041 114.01
.536 1.934 5.278 8.000 91.80 10.332 12.298 114.66 (spun)
1.08 1.943 5.235 7.947 92.13 10.269 12.222 115.51 (spun)
So, please move me up on the list for the 12.041@114.01!!!! with 1.722 60'!!!
Daren
56 Deg. 50 % humidity 30.24 Barometer
By my calculator, that comes out to -435 Density altitude....Not perfect, but very nice
Got there around 515 pm, to find out they open at 2pm now and close at 8, so decided I better make a bunch of runs. Car was hot lapped all night
Raceweight 3450 with me in it. Car is a 3LT 6sp Z51, only mods are Drag radials, MTI tune, and Magnaflow mufflers (weld in, not cat back)
Here are results (i think in order)
R/T 60' 330' 1/8 MPH 1000 1/4 MPH
.350 1.840 5.236 8.012 90.31 10.371 12.374 113.01
.181 1.749 5.065 7.801 91.06 10.162 12.176 112.10 hit rev 3rd
.115 1.727 5.065 7.815 91.02 10.166 12.147 113.75 new best
.094 1.862 5.210 7.955 90.62 10.302 12.284 113.37
.109 1.841 5.191 7.919 91.57 10.257 12.225 114.44
.096 1.913 5.255 7.980 91.24 10.311 12.284 113.81
.212 1.801 5.139 7.864 91.76 10.197 12.163 114.71
.118 1.744 5.065 7.776 91.93 10.112 12.083 114.35
.116 1.722 5.021 7.738 91.73 10.072 12.041 114.01
.536 1.934 5.278 8.000 91.80 10.332 12.298 114.66 (spun)
1.08 1.943 5.235 7.947 92.13 10.269 12.222 115.51 (spun)
So, please move me up on the list for the 12.041@114.01!!!! with 1.722 60'!!!
Daren
Team Owner
Joined: Aug 2003
Posts: 38,314
Likes: 35
Well, decided to go to HRP tonight. Ill start with Conditions
56 Deg. 50 % humidity 30.24 Barometer
By my calculator, that comes out to -435 Density altitude....Not perfect, but very nice
Got there around 515 pm, to find out they open at 2pm now and close at 8, so decided I better make a bunch of runs. Car was hot lapped all night
Raceweight 3450 with me in it. Car is a 3LT 6sp Z51, only mods are Drag radials, MTI tune, and Magnaflow mufflers (weld in, not cat back)
Here are results (i think in order)
R/T 60' 330' 1/8 MPH 1000 1/4 MPH
.350 1.840 5.236 8.012 90.31 10.371 12.374 113.01
.181 1.749 5.065 7.801 91.06 10.162 12.176 112.10 hit rev 3rd
.115 1.727 5.065 7.815 91.02 10.166 12.147 113.75 new best
.094 1.862 5.210 7.955 90.62 10.302 12.284 113.37
.109 1.841 5.191 7.919 91.57 10.257 12.225 114.44
.096 1.913 5.255 7.980 91.24 10.311 12.284 113.81
.212 1.801 5.139 7.864 91.76 10.197 12.163 114.71
.118 1.744 5.065 7.776 91.93 10.112 12.083 114.35
.116 1.722 5.021 7.738 91.73 10.072 12.041 114.01
.536 1.934 5.278 8.000 91.80 10.332 12.298 114.66 (spun)
1.08 1.943 5.235 7.947 92.13 10.269 12.222 115.51 (spun)
So, please move me up on the list for the 12.041@114.01!!!! with 1.722 60'!!!
Daren
56 Deg. 50 % humidity 30.24 Barometer
By my calculator, that comes out to -435 Density altitude....Not perfect, but very nice
Got there around 515 pm, to find out they open at 2pm now and close at 8, so decided I better make a bunch of runs. Car was hot lapped all night
Raceweight 3450 with me in it. Car is a 3LT 6sp Z51, only mods are Drag radials, MTI tune, and Magnaflow mufflers (weld in, not cat back)
Here are results (i think in order)
R/T 60' 330' 1/8 MPH 1000 1/4 MPH
.350 1.840 5.236 8.012 90.31 10.371 12.374 113.01
.181 1.749 5.065 7.801 91.06 10.162 12.176 112.10 hit rev 3rd
.115 1.727 5.065 7.815 91.02 10.166 12.147 113.75 new best
.094 1.862 5.210 7.955 90.62 10.302 12.284 113.37
.109 1.841 5.191 7.919 91.57 10.257 12.225 114.44
.096 1.913 5.255 7.980 91.24 10.311 12.284 113.81
.212 1.801 5.139 7.864 91.76 10.197 12.163 114.71
.118 1.744 5.065 7.776 91.93 10.112 12.083 114.35
.116 1.722 5.021 7.738 91.73 10.072 12.041 114.01
.536 1.934 5.278 8.000 91.80 10.332 12.298 114.66 (spun)
1.08 1.943 5.235 7.947 92.13 10.269 12.222 115.51 (spun)
So, please move me up on the list for the 12.041@114.01!!!! with 1.722 60'!!!
Daren
Seems unfair to put you in with the group running headers.
Last edited by '06 Quicksilver Z06; Jan 7, 2007 at 10:24 PM.
Safety Car
Joined: Jun 2005
Posts: 4,905
Likes: 569
From: Bucks County PA
06C6FVR -
Nice Passes!!!!
Were you a little surprised your trap speeds were not higher???
It seems when you hook your trap speeds go down, but so does your et
Congrats on a NEW BEST!
Howard
Nice Passes!!!!
Were you a little surprised your trap speeds were not higher???
It seems when you hook your trap speeds go down, but so does your et
Congrats on a NEW BEST!
Howard