New headlight question
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Melting Slicks
Joined: May 2003
Posts: 3,494
Likes: 0
From: McKinney Tx
Cruise-In V Veteran
St. Jude's Donor '05
just finished reading this entire thread 
MRAY my hat is off to you for your diligence in correcting the current lighting issue in the C5. I've have waited for something like this for quite some time. I applaud your commitment and hope that your equally rewarded for your venture.
That be said count me in
MRAY my hat is off to you for your diligence in correcting the current lighting issue in the C5. I've have waited for something like this for quite some time. I applaud your commitment and hope that your equally rewarded for your venture.That be said count me in
Racer
Joined: Sep 2003
Posts: 276
Likes: 0
From: Issaquah Wa
Okay Guys (and gals 
):
I need some input----would you:
Rather have six small holes in the face of the bezel that surrounds the two small light modules allowing you to independantly adjust each from the front without removing any piece of the headlight....
or
No holes but you have to remove the headlight surround and the bezel to adjust the headlights?
):I need some input----would you:
Rather have six small holes in the face of the bezel that surrounds the two small light modules allowing you to independantly adjust each from the front without removing any piece of the headlight....
or
No holes but you have to remove the headlight surround and the bezel to adjust the headlights?
Thread Starter
Team Owner
Joined: Dec 2003
Posts: 21,846
Likes: 140
From: When all is said and done... there is a hell of a lot more said than done. Riverside,Texas
St. Jude Donor '05 thru '26
Originally Posted by mray
Okay Guys (and gals ):
I need some input----would you:
Rather have six small holes in the face of the bezel that surrounds the two small light modules allowing you to independantly adjust each from the front without removing any piece of the headlight....
or
No holes but you have to remove the headlight surround and the bezel to adjust the headlights?
):I need some input----would you:
Rather have six small holes in the face of the bezel that surrounds the two small light modules allowing you to independantly adjust each from the front without removing any piece of the headlight....
or
No holes but you have to remove the headlight surround and the bezel to adjust the headlights?
Thread Starter
Team Owner
Joined: Dec 2003
Posts: 21,846
Likes: 140
From: When all is said and done... there is a hell of a lot more said than done. Riverside,Texas
St. Jude Donor '05 thru '26
Originally Posted by mray
Okay Guys (and gals ):
I need some input----would you:
Rather have six small holes in the face of the bezel that surrounds the two small light modules allowing you to independantly adjust each from the front without removing any piece of the headlight....
or
No holes but you have to remove the headlight surround and the bezel to adjust the headlights?
):I need some input----would you:
Rather have six small holes in the face of the bezel that surrounds the two small light modules allowing you to independantly adjust each from the front without removing any piece of the headlight....
or
No holes but you have to remove the headlight surround and the bezel to adjust the headlights?
Racer
Joined: Sep 2003
Posts: 276
Likes: 0
From: Issaquah Wa
Okay Guys (and gals ):
I need some input----would you:
Rather have six small holes in the face of the bezel that surrounds the two small light modules allowing you to independantly adjust each from the front without removing any piece of the headlight....
or
No holes but you have to remove the headlight surround and the bezel to adjust the headlights?
):I need some input----would you:
Rather have six small holes in the face of the bezel that surrounds the two small light modules allowing you to independantly adjust each from the front without removing any piece of the headlight....
or
No holes but you have to remove the headlight surround and the bezel to adjust the headlights?
Racer
Joined: Apr 2004
Posts: 373
Likes: 1
From: Grace Valley: A small, peaceful & beautiful valley in the Volunteer State
Originally Posted by Vette-Pilot
No Holes.
Once you get the headlights adjusted then you should be all set and without the holes you would have a much cleaner look
Once you get the headlights adjusted then you should be all set and without the holes you would have a much cleaner look
