NavTool


I asked a question about the RCA plugs.
The Numbering of the plugs caused me confusion.
There are 5 RCA plugs They are grouped 3 into a black connector and 2 into a black connector.
The Group of three is labeled thus:
Video input 1 = Front Camera
Video input 2 = Left Side Camera
Video output = Right Side Camera
The Group of two is labeled thus:
Video Input 1 = Audio red
Video Input 2 = Audio black
The group of 2 audio is used in connection with an AUX jack and one of these: http://www.discountcarstereo.com/ima...2.5-RCA3_m.jpg
If you don't have an AUX jack, you can do blue tooth audio streaming.
That takes care of pretty much all my wiring questions.
Elmer


I just asked about the phones not being answered and I asked how many units shipped in this first batch that is being currently delivered.
Elmer


Thank You
NavTool Sales Team
NavTool Inc.
Elmer





I asked a question about the RCA plugs.
The Numbering of the plugs caused me confusion.
There are 5 RCA plugs They are grouped 3 into a black connector and 2 into a black connector.
The Group of three is labeled thus:
Video input 1 = Front Camera
Video input 2 = Left Side Camera
Video output = Right Side Camera
The Group of two is labeled thus:
Video Input 1 = Audio red
Video Input 2 = Audio black
The group of 2 audio is used in connection with an AUX jack and one of these: http://www.discountcarstereo.com/ima...2.5-RCA3_m.jpg
If you don't have an AUX jack, you can do blue tooth audio streaming.
That takes care of pretty much all my wiring questions.
Elmer
I am only going to hook up a front camera, so I presume it will connect to Video Input 1 which is on the 3-wire group. Correct?
What if a person wanted to hook up 4 cameras-Front, Back, and two sides. I thought the NavTool had the capability to handle 4 cameras, but where is the 4th input?
Norm


I am only going to hook up a front camera, so I presume it will connect to Video Input 1 which is on the 3-wire group. Correct?
What if a person wanted to hook up 4 cameras-Front, Back, and two sides. I thought the NavTool had the capability to handle 4 cameras, but where is the 4th input?
Norm

Elmer
Last edited by eboggs_jkvl; Mar 29, 2016 at 04:57 PM.





Thanks. I plan on using the rear camera that comes with the Vette also, but I seem to remember that there was supposed to be a NavTool connection for the rear camera. Maybe after all of the turmoil with this process I am not remembering correctly.
Norm
The Best of Corvette for Corvette Enthusiasts
Today they could not be reached by phone so I e-mailed them. They did return my e-mail and said all C7 interfaces were supposed to go out yesterday but UPS could not pick them up due to high winds that knocked down trees. They said mine went out today and that I should see a change on my tracking number by 8:30 tonight. We will see if it is true or another story.
I took two end shots of the elusive end caps as well. One end cap looks like it was not professionally cut out. Thats just my 44 years of experience as a tool and die maker talking though. What do I know?
Emer I hope you'll be able to talk us less than stellar electronics guys through this install with some good instructions and pictures!!!
Let the games begin!!!!
Last edited by Skidplate; Mar 29, 2016 at 08:05 PM.
I chose off for everything except the phone mirroring. I have movement with my tracking number with a 4/1 delivery date. Mine probably won't have any rca connections.
Jason
I chose off for everything except the phone mirroring. I have movement with my tracking number with a 4/1 delivery date. Mine probably won't have any rca connections.
Jason












