Threads Tagged with machining

Do new Ls7 blocks need Machining?

Searya on 11-11-2012

11-19-2012 08:12 PM
by Searya

2

864

C6 Tech/Performance

025, 1094, block, corvette, deck, decking, fel, future, gaskets, head, heads, height, machining, performance, pro, rebuilds, tight

zero deck height or thinner head gasket?

C4Callum on 03-09-2012

03-12-2012 03:18 AM
by C4Callum

11

11,478

machine shop , ballpark pricing

car48nut on 02-04-2012

02-07-2012 08:20 PM
by BLOCKMAN

4

777

C6 Forced Induction/Nitrous

2002, c5, car, corvette, fit, gto, machining, race, saver, size, space, spare, tire, z06

[Z06]

Space saver spare for Z06?

skeet on 02-05-2012

02-06-2012 04:24 PM
by jwg2

8

1,791

C5 General

blower, boost, chevy, coolent, gasket, gaskets, head, leak, ls2, ls9, machining, mls, na, pushing, studs, supercharger, water

Pushing a Little Water - Best Head Gasket for LS2?

(

1 2)

5 Liter Eater on 04-30-2011

01-31-2012 09:00 PM
by 4SELLL

28

25,336

205, 402, afr, aluminum, blower, cam, cams, forged, fs, ls2, machine, machining

FS! LS2 aluminum 402, afr 205's, blower cam, fresh out the machine shop!

SIC VET on 11-25-2011

11-26-2011 07:29 PM
by SIC VET

1

1,126

Southwest

block, blocked, blocks, build, calif, corvette, cost, engine, fees, houston, lrbperformance, machine, machining, midyear, site, starting, web

Engine Block Machine Costs

woodsdesign on 11-12-2011

11-16-2011 07:29 AM
by woodsdesign

12

2,848

c5, c6, corvette, front, machining, min, minimum, minimumthickness, rotor, thickness, z06

Minimum thickness of front rotors?

Wadoka on 11-13-2011

11-13-2011 11:00 PM
by Wadoka

5

1,848

ac, align, auto, automotive, bad, blocks, dowel, fixtures, forum, hone, job, machine, machining, shop, work

Continuing the saga of bad auto machine block shop work.

cardo0 on 09-22-2011

09-22-2011 10:38 AM
by H P Bushrod

3

1,908

383, 396, assembly, build, building, built, cheaper, chevy, forged, knock, lt1, machining, piston, rotating, stroker

A well Built 396 Lt1 vs. a well built 383 Lt1

(

1 2)

JimiHendrix on 07-21-2008

07-16-2011 01:23 PM
by PLRX

33

68,613

block, buy, hone, ls2, machine, machining, prep, prepping

Block Prep for a new GM LS2 block

cwalsh on 07-03-2011

07-03-2011 05:11 PM
by chevylad

1

1,654

12530283, 1980, afuel, block, blocks, corvette, drilled, drilling, engine, fuel, l31, machining, mechanical, pump, replace, vortec

Roller cam block

scottyp99 on 06-22-2011

06-24-2011 03:05 PM
by fauxrs

8

4,533

99, brake, cleaner, corvette, grand, hone, machine, machining, orbital, pads, resurfacing, roteors, rotor, rotors, sander, sandpaper

Machine Rotors? Say What?!

abstruse1 on 05-20-2011

05-23-2011 03:04 AM
by Chris_B

13

3,651

C6 Tech/Performance

1990, 1994, chevrolet, cleveland, corvette, corvetter, corvettes, dual, flywheel, flywheels, machining, mass, mast, ohio, sale, sales, vette

Like New Dual Mass Flywheel

Kubs on 04-24-2011

05-13-2011 12:44 PM
by Kubs

9

919

C4 Parts for Sale/Wanted

brake, c3, caliper, calipers, calpers, corvetee, corvette, installation, machining, rebuild, sleeve, sleeved, sleeves, ss, stainless

Brake caliper machining / sleeve installation

bonadurers on 08-19-2010

05-03-2011 01:17 PM
by corvettedk

8

10,320

221438, 22143816, 640, beehive, behive, corvette, forums, machining, manley, nextek, prices, specs, spring, springs, valve

Beehive Valve Springs

Sinister-one on 03-02-2011

03-15-2011 11:51 PM
by 99blancoss

7

2,105

350, 383, c3, chs, corvette, cubic, don, extra, good, hudson, lind, ma, machine, machining, stroker, summit, worth

350 vs 383

Don Lind on 01-14-2011

01-16-2011 03:50 PM
by Belgian1979vette

17

9,930

C6 Forced Induction/Nitrous

block, corvette, engine, gm, katech, ls9, lsa, machining, number, numbers, oil, part, parts, springs, squirter, squirters

Need a LS9 Part number.

wdo-mkr on 01-02-2011

01-11-2011 09:04 AM
by Katech_Zach

11

3,847

aluminum, area, billet, ca, cnc, custom, cut, designs, machines, machining, phoenix, piece, pieces, redding, work

Who Can Custom Cut/CNC me a piece of Billet Aluminum

vettnut on 01-05-2011

01-05-2011 05:04 PM
by toddalin

6

1,228

383, 64cc, 716, abot, base, brodix, circle, heads, ik180, machining, poured, procomp, rods, scat, small

Talk to me abot 383 strokers

Bowerss2 on 09-28-2010

10-31-2010 02:02 AM
by Corvette Charlie

19

1,865

countershaft, couter, fix, leak, leaking, length, m20, machining, muncie, parsons, replace, seals, shaft, shifter, tbtranscom, tom

Muncie M20 Countershaft Question?

hokie04 on 10-19-2010

10-21-2010 10:55 PM
by Dan Hampton

16

6,027

aluminum, bolt, ca, drilling, machine, machining, nj, pattern, redrilling, services, shop, templet, tool, wheel, wheels

Re-drilling wheels

Dr L-88 on 10-07-2010

10-08-2010 05:36 PM
by 68 NJConv 454

6

1,487

2008, 500, 75, approx, blown, c6, cam, clutch, corvette, corvettes, hp, machining, motor, motors, placement, rear, zo6

Blown Motor: Where to go from here?

(

1 2)

Iceman_K on 08-23-2010

08-25-2010 05:39 PM
by Iceman_K

28

1,475

10000, bearing, bushing, clearance, clearence, crank, gauges, hits, input, installation, keisler, lt1, machining, mic, pilot, sbc, shaft, t45, tolerance, trans, transmission

Pilot bushing clearance spec?

weinh on 07-06-2010

07-12-2010 08:47 AM
by GENE-KEISLER SALES

14

11,758

2005, brake, change, corvette, cross, cut, drilled, hard, machineing, machining, middletown, ny, rotors, z51

Z51 Cross Drilled rotors

Dave S on 06-08-2010

06-14-2010 10:45 AM
by Dave S

7

775

Northeast

block, county, engine, lower, machine, machining, shop, westchester

Need a machine shop in lower Fairfield/Westchester

lvrpool32 on 06-07-2010

06-07-2010 03:15 PM
by lvrpool32

0

356

Northeast

area, auto, balancing, bay, california, corvette, dave, engine, machine, machining, performance, sf, shop, shopblocker, shops

A great SF Bay Area machine shop to keep in mind

LouieM on 06-04-2010

06-05-2010 01:51 PM
by LouieM

5

6,980

corvette, guides, head, heads, ii, leaking, machining, motor, oil, problems, product, products, smoking, sportsman, usage, valve, world

World products Sportsman head problem

RIO68 on 05-31-2010

06-01-2010 06:28 PM
by RIO68

5

1,286

C3 General

area, bay, ca, cylinder, daves, east, engine, head, machine, machining, machinist, newark, sf, shop, shops

Engine machine shop SF East Bay Area

timewstr on 05-06-2010

05-06-2010 07:10 PM
by BEARSZ

2

2,666

align, automotive, dallas, engine, fort, hone, keller, machine, machining, performance, race, shop, shops, texas, worth

Best/reputable Machine shop in Dallas fort worth Area

66grandsport on 09-19-2008

04-06-2010 08:17 AM
by dvdmiranda584

15

13,665

[Z06]

[VIDEO] CNC machining a custom A-plate

Katech_Zach on 01-07-2010

01-07-2010 08:32 PM
by Randy@DRM

6

587

[Z06]

How easy is it to swap ex valves then?

StrokerAceZO6 on 01-04-2010

01-04-2010 08:09 PM
by andreas g.

9

787

1953, amounts, chevy, correct, corvette, fit, formula, intake, machining, manifold, manifolds, milling, sbc, shaved

Intake manifold machining

bowtyebob on 12-16-2009

12-18-2009 10:14 AM
by bowtyebob

11

3,000

brake, drilled, forum, houston, machine, machining, positive, rake, repair, rotor, rotors, slotted, tuning, turn, tx

Brake Rotor Help- Houston

Silverspeed on 11-19-2009

12-04-2009 12:40 AM
by LoneStarFRC

13

1,530

Southwest

1590, baf, chevrolet, machining, mv1598, no, power, required, rv, sealed, seals, springs, stem, umbrella, valve

Help With Valve Springs

jordan89 on 10-28-2009

11-03-2009 10:35 AM
by jordan89

18

1,417

19841996, bushings, c4, corvette, daily, driver, grease, long, machining, poly, polyurethane, rubber, suspension, urethane, work

How well do polyurethane suspension bushings work for the street?

turbotim23 on 10-10-2009

10-12-2009 06:13 PM
by JackDidley

17

2,089

3869942, 390, 427, 66, 66427, bolts, corvette, engine, flywheel, hiperfengineparts, machining, sale, vette, work

66 427 Hi Perf engine , machine work done needs assy, N.IL

tr6lover on 10-07-2009

10-07-2009 01:22 PM
by tr6lover

0

889

C1 & C2 Parts

builder, builders, dallas, dfw, dp, egine, engine, fort, garland, machine, machining, shop, shops, tx, worth

Engine Builder/machine shop in DFW, TX area?

Rebelrob on 09-27-2009

09-28-2009 11:33 PM
by Rebelrob

6

1,799

[Z06]

What oil temps are you seeing at track ?

(

1 2)

Mjolitor 68 on 09-19-2009

09-22-2009 11:46 AM
by Painrace

34

1,583

195, afr, eliminator, heads, machining, oil, return, seals, stem, valve

AFR heads still have oil return problem

MotorHead on 06-21-2009

06-22-2009 07:40 PM
by MotorHead

15

2,924

automotive, ca, cnc, jose, machining, rottler, san

Looking for a Job.

Wicked_Z06 on 05-27-2009

06-18-2009 03:44 PM
by RichieRichZ06

8

830

Northern California

acs, apr, fenders, hoods, katech, machining, panels, renboard, rockers, side, style, video, zr1

[ZR1]

A host of new body parts available Feb-Apr., 7 new hoods, ZR1 fenders and more

(

1 2)

Katech_Zach on 01-22-2009

06-11-2009 07:58 PM
by v502

35

2,387

Autocrossing & Roadracing

1984, bilstein, c4, coil, coilover, coilovers, convert, converting, corvette, groove, hd, machining, put, qa1, shocks

Converting C4 bilstein shocks to coilover?

(

1 2)

87L98Z52 on 06-02-2009

06-04-2009 09:37 AM
by BrianCunningham

29

11,767

body, c5, c6, corvette, drilled, ls1, ls6, lsx, machining, ported, procharged, pvc, stock, throttle, z06

WTB LS1-LS6 Ported Throttle Body

Big Red Machine on 03-31-2009

04-02-2009 09:57 PM
by Big Red Machine

5

538

C5 Parts for Sale/Wanted

30, corvette, gear, machine, machining, pinion, respline, spline

Who can machine my C5Z pinion gear to accept a 32 spline C6Z tailshaft?

tunedportcj5 on 01-05-2009

01-05-2009 01:30 PM
by SteveDoten

7

1,179

Autocrossing & Roadracing

bars, c4, corvette, dimentions, dogbones, end, ends, function, machining, make, rod, rodend, spherical, sway, tie, titanium

Spherical rod ends, for sway bars. Dimensions for a C4?

steve40th on 10-04-2008

10-04-2008 04:53 PM
by rustyguns

6

701

bolts, cap, caps, ccw, center, classic, classics, hub, lug, machining, nuts, put, rim, specs, torque, track, wheels

CCW rim questions-track only center cap? lugnuts?

Fartpipe on 06-29-2008

07-02-2008 01:54 AM
by JerryX

3

875

C5 General

2400, 4170, 421, block, bore, bowtie, ci, combinations, engine, machining, rent, require, sbc, small, sonic, stall, test

Anyone use the Bow Tie Block #10185047? 421 build!

(

1 2 3 ... Last Page)

88BlackZ-51 on 12-29-2007

01-14-2008 09:36 PM
by 88BlackZ-51

69

5,499

c4, chatsworthca, chevy, cilinder, corvette, cost, cylinder, engine, good, head, job, machining, rebuilt, valve, work

How much does a head job cost?

(

1 2)

Strick on 11-24-2007

11-25-2007 09:30 AM
by zr1fred

23

10,807

machining 99 LS1 crank main journals... questions

Bloodvette on 11-07-2007

11-10-2007 11:29 AM
by Bloodvette

2

383

202, 327, block, cost, costs, craigslist, crank, engine, heads, machining, price, state, stock, typical, washington

Typical cost to take a stock 327 block & crank & heads for machining?

(

1 2)

Kensmith on 09-14-2007

09-18-2007 03:20 PM
by Geek's 65

24

9,415

bit, bits, carbon, carbonfiber, cut, drill, drilling, fiber, helmet, helmets, hole, holes, kevlar, machining, small, type

Best drill bit to use on carbon fiber?

TomG3 on 09-13-2007

09-15-2007 08:24 PM
by TomG3

17

15,608

C6 Corvette General Discussion

2007, brake, corvette, machining, rotor, z51

Resurfacing Z51 rotors

barakmd on 08-16-2007

08-17-2007 03:45 AM
by barakmd

12

1,783

17, 18, 1973, adapters, c3, c5, corvette, custom, hub, machining, mounts, pics, vette, wheel, wheels

C5 wheels on a C3

(

1 2)

tabbruzz on 07-23-2007

08-02-2007 11:32 PM
by bluegtp

26

3,938

C3 General

block, broach, broached, broaching, chevy, deck, decking, engine, machining, paterens, quotes, surface

Interesting block deck surface machining pattern

AZDoug on 03-25-2007

03-27-2007 02:19 AM
by OldDog58Vette

14

1,304

brake, cajon, diego, el, machine, machining, place, roters, rotor, rotors, san, shop, shops, turn, turned

SD area machine shop to turn rotors?

jmzvet on 02-20-2007

02-25-2007 10:38 AM
by Nijinsky3

8

3,456

Southern California

afr, corvette, cylinder, flip, guide, guideplate, guides, head, heads, lt1, machining, plate, plates, push, require, rod

Push Rod Guide Plates...Needed?

Strats-N-Vettes on 05-18-2006

05-18-2006 10:57 PM
by Strats-N-Vettes

19

6,464

arm, arms, c3, c4, caster, control, corvete, corvette, machining, offset, set, shaft, shafts, upper, washersspacers

Offset upper control arm shafts

NHvette on 04-21-2006

04-24-2006 12:39 PM
by NHvette

12

3,965

2006, c5, ca, competition, compition, corvette, gray, machine, machining, rims, roseville, silver, wheels, z06

[Z06]

Machine Silver with Comp Gray wheels

SMOKNC6Z06 on 03-20-2006

03-22-2006 01:16 PM
by SMOKNC6Z06

15

1,877

150, 160, 194, 194vs, 202, 5500, camelback, cons, heads, hp, machining, pros, stock, valves, verses, versus, vs

heads 1.94 vs 2.02 pros and cons

Vandoren on 12-24-2005

12-26-2005 01:00 PM
by toddalin

6

8,630

Machining valve covers sidewall for rocker clearance- who can do this?

lawcorvette on 11-25-2005

11-26-2005 01:01 PM
by 65Z01

3

347

bad, car, carquesr, carquest, cost, engines, good, machine, machining, nachine, napa, quest, shop, shops, work

who does your machine shop type of work? car quest, napa, or individual?

pionexxxx on 09-09-2005

09-10-2005 06:29 PM
by Sleazy Rider

7

3,945

C3 General

beehive, breakage, corvette, machining, spring, springs

BeeHive springs????

FoolCrzy on 08-19-2005

08-20-2005 10:23 AM
by Corvette Kid

11

848

bearing, bearings, car, corvette, crank, cutting, factory, lt1, machining, pics, replace, replacement, rod, scored, standard

Scored rod bearings, LT1: what would you do?

sothpaw2 on 08-19-2005

08-19-2005 05:35 PM
by sothpaw2

17

6,695

006, 008, axial, flange, flywheel, machining, mounting, run, runout, tolerance, tolorance

Flywheel runout ?

nassau66427 on 03-30-2005

03-30-2005 07:57 PM
by Allcoupedup

2

1,182

arm, arms, c2, c3, caster, control, corvette, improve, machining, offset, redrill, shaft, shafts, slug, upper

Upper Control Arm Offset Shafts

djcwardog on 01-09-2005

01-09-2005 06:59 PM
by norvalwilhelm

8

5,132

aes, bad, beware, deal, elk, elkgrove, grove, il, illinois, machine, machining, performance, reviews, shop, village

Machine Shop Gone Wrong (aes In Elk Grove)!!!!!!!!!!!!

L.Lopez on 12-07-2004

12-10-2004 11:50 PM
by ddecart

13

6,407

Great Lakes

1985, 44, corvette, dana, differential, hd, machining, spool, toms

SPOOL in Dana 44, what machining needs to be done?

VTESPEED on 11-08-2004

11-08-2004 03:42 PM
by ski_dwn_it

3

1,832