C7 General Discussion General C7 Corvette Discussion not covered in Tech
Sponsored by:
Sponsored by:

FYREANT's Instructional "How To:" guides

Thread Tools
 
Search this Thread
 
Old 12-02-2017, 06:49 PM
  #1  
FYREANT
I'm Batman..
Pro Mechanic
Support Corvetteforum!
Thread Starter
 
FYREANT's Avatar
 
Member Since: Apr 2014
Location: Lehigh Acres FL
Posts: 6,131
Received 908 Likes on 561 Posts
Tech Contributor

Default FYREANT's Instructional "How To:" guides

Hello all, just wanted to post all of the instructional How To threads I've written in one location so they are easier to find. As I write new content, this thread will be updated so feel free to bookmark this page!

Also, if there is something you feel we need a How To thread on, please let me know and I can see about putting something together!

enjoy!


Brake-System:

HOW TO: Adding Z51/Z06 Brake Cooling Ducts and Deflectors to Base Stingray
https://www.corvetteforum.com/forums...-stingray.html

HOW TO: Z51 Brake System Upgrade for Base Model Stingray
https://www.corvetteforum.com/forums...-stingray.html


Body / Aesthetics:

HOW TO: Painting C7 Engine Bay Parts
https://www.corvetteforum.com/forums...bay-parts.html

HOW TO: Restore mirror finish to polished aluminum after a chemical mishap!
https://www.corvetteforum.com/forums...al-mishap.html

HOW TO: Installing JW Motorsports Side Skirts on a C7
https://www.corvetteforum.com/forums...s-on-a-c7.html

HOW TO: Installing JW Motorsports Stage 2 (and Stage 3) Front Splitter on a C7
https://www.corvetteforum.com/forums...r-on-a-c7.html

HOW TO: C7 Front Fender and Headlamp Removal
https://www.corvetteforum.com/forums...p-removal.html


Engine / Mechanical:

HOW TO: Installing a new LMR 160° Thermostat and Housing
https://www.corvetteforum.com/forums...d-housing.html

HOW TO: EdgyVette C7 E85 Stealth Flex Fuel Kit Installation
https://www.corvetteforum.com/forums...tallation.html

HOW TO: Install Alky Control Meth Injection system in a C7
https://www.corvetteforum.com/forums...m-in-a-c7.html

HOW TO: Add a new Windshield Washer Reservoir & Pump & Relocating them on a NON-Z51
https://www.corvetteforum.com/forums...a-non-z51.html

HOW TO: C7 LT1 Complete Engine Removal Procedure Guide in 50 steps (on jack stands!)
https://www.corvetteforum.com/forums...ck-stands.html

HOW TO: Honing the Cylinders in your LT1 Block
https://www.corvetteforum.com/forums...lt1-block.html

HOW TO: Replacing LT1 Pistons / Installing Vengeance Racing Drop-In LT1 Pistons
https://www.corvetteforum.com/forums...1-pistons.html

HOW TO: File Fitting and Installing New Piston Rings and Checking Oil Ring Tension
https://www.corvetteforum.com/forums...g-tension.html

HOW TO: Check Main & Rod Bearing Clearances with Plastigage
https://www.corvetteforum.com/forums...lastigage.html

HOW TO: LT1 Camshaft and Cylinder Head Install Guide
https://www.corvetteforum.com/forums...all-guide.html

HOW TO: Installing a Cam Phaser Limiter
https://www.corvetteforum.com/forums...r-limiter.html

HOW TO: Degree Your C7 LT1 Camshaft!
https://www.corvetteforum.com/forums...-camshaft.html

HOW TO: C7 Rocker Arm Trunnion Upgrades
https://www.corvetteforum.com/forums...-upgrades.html

HOW TO: Installing a Fuel Pump Lash Cap in an LT1 and Checking for Proper Clearances
https://www.corvetteforum.com/forums...learances.html


Driveline / Transmission / Clutch:

HOW TO: Install a Mantic Twin Disc Clutch and Flywheel in your C7
https://www.corvetteforum.com/forums...n-your-c7.html

Tuning:

HOW TO: Disable AFM Exhaust Valve Actuators with HP Tuners
https://www.corvetteforum.com/forums...hp-tuners.html

HOW TO: Connecting an Innovate Motorsports AFR/Boost Gauge to HP Tuners
https://www.corvetteforum.com/forums...hp-tuners.html

Other Member Submitted HOW TO: Guides:


Theta's Master List of How-To Guides for C7 Corvette Stingray
https://www.corvetteforum.com/forums...-stingray.html

GT Seat to Competition Seat Conversion
https://www.corvetteforum.com/forums...onversion.html

Manual transmission and rear differential fluid service
https://www.corvetteforum.com/forums...d-service.html

How To: Tranny Flush with Mobil 1 Synthetic LV ATF HP without dropping the pan
https://www.corvetteforum.com/forums...g-the-pan.html

The Geezer's Navtool installation
https://www.corvetteforum.com/forums...tallation.html

How-To: Lower The Vehicle on Stock Bolts
https://www.corvetteforum.com/forums...nd-photos.html

How-To: Install Flex Fuel Sensor (In engine bay)
https://www.corvetteforum.com/forums...r-install.html

How-To: Convert/Swap Upper Interior Panels to Suded Microfiber
https://www.corvetteforum.com/forums...th-photos.html

How-To: Remove Rear Fascia (with Pictures)
https://www.corvetteforum.com/forums...r-removal.html

How-To: Remove Front Fascia / Front Bumper Cover (with Video & Pictures)
https://www.corvetteforum.com/forums...val-video.html

How-To: Self-Calibrate Stubborn TPMS Sensors
https://www.corvetteforum.com/forums...ere-s-how.html

How To: Image Lights C7 specific
https://www.corvetteforum.com/forums...-specific.html

How To: Range AFM Disabler – No More Parasitic Battery Drain via Relay in Cord
https://www.corvetteforum.com/forums...y-in-cord.html

How To: Install a Leather Airbag Cover Yourself
https://www.corvetteforum.com/forums...-yourself.html

How To: Suede Z06 D shaped steering wheel WITHOUT Z06 logo
https://www.corvetteforum.com/forums...-z06-logo.html

How To: Install DSC Sport Controller
https://www.corvetteforum.com/forums...ontroller.html

Jet Vet's DIY wide body conversion project
https://www.corvetteforum.com/forums...n-project.html

Joemosfet's DIY widebody conversion project
https://www.corvetteforum.com/forums...n-project.html

How To: Add NPP Switch - True Manual On/Off Valve Control
https://www.corvetteforum.com/forums...e-control.html

How To: NPP Reverse-Engineered - Full Open/Close, Non-Factory-NPP Retrofit
https://www.corvetteforum.com/forums...-retrofit.html

How to install: DIY American Racing Mid-Length Headers
https://www.corvetteforum.com/forums...h-headers.html

DIY: Adding Z51 Sways to a base C7
https://www.corvetteforum.com/forums...a-base-c7.html

How to remove your rear lower fascia / bumper cover for exhaust removal
https://www.corvetteforum.com/forums...al-w-pics.html

How-to: Add Z06 fender spats to a Stingray with APR / similar aero with canards
https://www.corvetteforum.com/forums...h-canards.html

How To: DIY guide to replacing steering wheel bezels
https://www.corvetteforum.com/forums...el-bezels.html

HOW-TO: Install larger '19 Z06 (Auto) radiator
https://www.corvetteforum.com/forums...-radiator.html

Informational:

Race Fuels and how they compare to each other for power (E85, C85, & Meth included!)
https://www.corvetteforum.com/forums...post1596294482


Stay tuned, this thread will be updated frequently as new material is created.

Ant

Last edited by FYREANT; 08-07-2019 at 12:30 PM.
The following 31 users liked this post by FYREANT:
04train (12-02-2017), Art17 (05-29-2019), bigsapper (12-12-2017), consolidated (12-23-2017), cowboy casey (12-04-2017), curve65 (06-27-2018), davefreeman (01-05-2018), Dean_Machine (04-23-2018), devnull (01-26-2018), DickieDoo (12-29-2017), DSOMZ51 (11-28-2018), Duntov7 (12-03-2017), DWS44 (12-02-2017), Frankie2blue (11-24-2018), george vee (12-07-2017), gooddog (06-03-2018), JNess (12-02-2017), konqueror5 (01-15-2018), leftyf16 (05-12-2018), Mikark (04-05-2018), Motors5 (01-05-2018), phantom1 (02-28-2019), Porxter (06-21-2018), robert miller (02-17-2018), snow (12-29-2017), TOBASCO (02-17-2019), VetteDrmr (01-15-2018), Warpcorps (10-31-2020), westworld (03-23-2019), Z06INTHE6 (05-13-2019), Zymurgy (12-02-2017) and 26 others liked this post. (Show less...)
Old 12-02-2017, 06:54 PM
  #2  
JNess
Instructor
 
JNess's Avatar
 
Member Since: May 2017
Location: DFW Texas
Posts: 176
Received 54 Likes on 36 Posts
Default

Nice, just checked out your write up on Painting C7 Engine Bay parts.

I'll have to book mark it for later.
Old 12-02-2017, 07:03 PM
  #3  
Zymurgy
Moderator

Support Corvetteforum!
 
Zymurgy's Avatar
 
Member Since: Feb 2006
Location: DFW Area TX
Posts: 35,611
Received 15,076 Likes on 6,173 Posts

Default

Made this a sticky thread.
The following 2 users liked this post by Zymurgy:
devnull (01-26-2018), Skid Row Joe (12-14-2017)
Old 12-02-2017, 07:26 PM
  #4  
FYREANT
I'm Batman..
Pro Mechanic
Support Corvetteforum!
Thread Starter
 
FYREANT's Avatar
 
Member Since: Apr 2014
Location: Lehigh Acres FL
Posts: 6,131
Received 908 Likes on 561 Posts
Tech Contributor

Default

Originally Posted by Zymurgy
Made this a sticky thread.
Thank you! Also, sent you a PM
Old 12-23-2017, 03:29 PM
  #5  
FYREANT
I'm Batman..
Pro Mechanic
Support Corvetteforum!
Thread Starter
 
FYREANT's Avatar
 
Member Since: Apr 2014
Location: Lehigh Acres FL
Posts: 6,131
Received 908 Likes on 561 Posts
Tech Contributor

Default

Updated list and added:

HOW TO: Disable AFM Exhaust Valve Actuators with HP Tuners
Old 12-24-2017, 05:00 PM
  #6  
FYREANT
I'm Batman..
Pro Mechanic
Support Corvetteforum!
Thread Starter
 
FYREANT's Avatar
 
Member Since: Apr 2014
Location: Lehigh Acres FL
Posts: 6,131
Received 908 Likes on 561 Posts
Tech Contributor

Default

Updated list and added:

HOW TO: Installing JW Motorsports Stage 2 Front Splitter on a C7
Old 12-29-2017, 10:43 AM
  #7  
snow
Drifting
Support Corvetteforum!
 
snow's Avatar
 
Member Since: Aug 2009
Location: South Fla
Posts: 1,582
Received 220 Likes on 171 Posts
St. Jude Donor '10, '17-'18-'19

Default

nice!
Old 01-02-2018, 01:58 AM
  #8  
FYREANT
I'm Batman..
Pro Mechanic
Support Corvetteforum!
Thread Starter
 
FYREANT's Avatar
 
Member Since: Apr 2014
Location: Lehigh Acres FL
Posts: 6,131
Received 908 Likes on 561 Posts
Tech Contributor

Default

Updated list and added:

Informational section created, first entry added for:
Race Fuels and how they compare to each other for power (E85, C85, & Meth included!)
Old 01-03-2018, 09:15 AM
  #9  
Rich_Redline
Premium Supporting Vendor
 
Rich_Redline's Avatar
 
Member Since: Jul 2016
Location: Ft. Lauderdale Florida
Posts: 295
Received 3 Likes on 3 Posts
Default

Super clean car and super smart dude. Great work Anthony!
Old 01-03-2018, 02:39 PM
  #10  
FYREANT
I'm Batman..
Pro Mechanic
Support Corvetteforum!
Thread Starter
 
FYREANT's Avatar
 
Member Since: Apr 2014
Location: Lehigh Acres FL
Posts: 6,131
Received 908 Likes on 561 Posts
Tech Contributor

Default

Originally Posted by Rich_Redline
Super clean car and super smart dude. Great work Anthony!
Thanks Rich!!
Old 01-08-2018, 04:49 PM
  #11  
0Cajun @ Edgyvette
Former Vendor
 
Cajun @ Edgyvette's Avatar
 
Member Since: Mar 2003
Location: Tampa FL
Posts: 18,673
Received 393 Likes on 286 Posts
St. Jude Donor '07-'08-'09-'10-'11-'12'-'13-'14-'15

Default

Dude , this is awesome.

is there a DIY for removal of front fenders?
Old 01-08-2018, 05:17 PM
  #12  
FYREANT
I'm Batman..
Pro Mechanic
Support Corvetteforum!
Thread Starter
 
FYREANT's Avatar
 
Member Since: Apr 2014
Location: Lehigh Acres FL
Posts: 6,131
Received 908 Likes on 561 Posts
Tech Contributor

Default

Originally Posted by Cajun@Edgyvette
Dude , this is awesome.

is there a DIY for removal of front fenders?
Thanks, Cajun! There is still some DIY info in the older how to's in the tech section. Here is a link: https://www.corvetteforum.com/forums...-stingray.html

Go to the section labelled:

"Exterior Body Panels / Trim"

Ant
Old 01-08-2018, 05:22 PM
  #13  
0Cajun @ Edgyvette
Former Vendor
 
Cajun @ Edgyvette's Avatar
 
Member Since: Mar 2003
Location: Tampa FL
Posts: 18,673
Received 393 Likes on 286 Posts
St. Jude Donor '07-'08-'09-'10-'11-'12'-'13-'14-'15

Default

Originally Posted by FYREANT
Thanks, Cajun! There is still some DIY info in the older how to's in the tech section. Here is a link: https://www.corvetteforum.com/forums...-stingray.html

Go to the section labelled:

"Exterior Body Panels / Trim"

Ant

Thanks. I see rear but not front fenders
Old 01-08-2018, 09:06 PM
  #14  
FYREANT
I'm Batman..
Pro Mechanic
Support Corvetteforum!
Thread Starter
 
FYREANT's Avatar
 
Member Since: Apr 2014
Location: Lehigh Acres FL
Posts: 6,131
Received 908 Likes on 561 Posts
Tech Contributor

Default

Originally Posted by Cajun@Edgyvette
Thanks. I see rear but not front fenders
Updated list. Added:

HOW TO: C7 Front Fender and Headlamp Removal
https://www.corvetteforum.com/forums...p-removal.html

Ant
Old 01-08-2018, 09:14 PM
  #15  
0Cajun @ Edgyvette
Former Vendor
 
Cajun @ Edgyvette's Avatar
 
Member Since: Mar 2003
Location: Tampa FL
Posts: 18,673
Received 393 Likes on 286 Posts
St. Jude Donor '07-'08-'09-'10-'11-'12'-'13-'14-'15

Default

Man you are all over it!

Thanks man
Old 01-15-2018, 01:20 PM
  #16  
0Cajun @ Edgyvette
Former Vendor
 
Cajun @ Edgyvette's Avatar
 
Member Since: Mar 2003
Location: Tampa FL
Posts: 18,673
Received 393 Likes on 286 Posts
St. Jude Donor '07-'08-'09-'10-'11-'12'-'13-'14-'15

Default

Anyone have the wiring diagram for the C7 Z MAF and O2 sensors. Tuning the new PTS single turbo and car wont go into closed loop. Thinking it is signal issue to MAF or O2s

Thanks
Old 01-15-2018, 01:34 PM
  #17  
FYREANT
I'm Batman..
Pro Mechanic
Support Corvetteforum!
Thread Starter
 
FYREANT's Avatar
 
Member Since: Apr 2014
Location: Lehigh Acres FL
Posts: 6,131
Received 908 Likes on 561 Posts
Tech Contributor

Default

Originally Posted by Cajun@Edgyvette
Anyone have the wiring diagram for the C7 Z MAF and O2 sensors. Tuning the new PTS single turbo and car wont go into closed loop. Thinking it is signal issue to MAF or O2s

Thanks
I can probably pull the diagram later tonight when I get home

Get notified of new replies

To FYREANT's Instructional "How To:" guides

Old 01-21-2018, 06:22 PM
  #18  
FYREANT
I'm Batman..
Pro Mechanic
Support Corvetteforum!
Thread Starter
 
FYREANT's Avatar
 
Member Since: Apr 2014
Location: Lehigh Acres FL
Posts: 6,131
Received 908 Likes on 561 Posts
Tech Contributor

Default

Updated list

Added: How to remove your rear lower fascia / bumper cover for exhaust removal

Ant
The following users liked this post:
Perf n Restore (01-22-2018)
Old 01-25-2018, 10:01 AM
  #19  
0Cajun @ Edgyvette
Former Vendor
 
Cajun @ Edgyvette's Avatar
 
Member Since: Mar 2003
Location: Tampa FL
Posts: 18,673
Received 393 Likes on 286 Posts
St. Jude Donor '07-'08-'09-'10-'11-'12'-'13-'14-'15

Default

Does anyone have an ECU pin out diagram for 2016 ZO6?
Old 01-25-2018, 12:27 PM
  #20  
FYREANT
I'm Batman..
Pro Mechanic
Support Corvetteforum!
Thread Starter
 
FYREANT's Avatar
 
Member Since: Apr 2014
Location: Lehigh Acres FL
Posts: 6,131
Received 908 Likes on 561 Posts
Tech Contributor

Default

Originally Posted by Cajun@Edgyvette
Does anyone have an ECU pin out diagram for 2016 ZO6?
My manual is for 2014. So is pre-Z06. Not sure if theu are different. I can get you a copy of the 2014 though if it helps.


Quick Reply: FYREANT's Instructional "How To:" guides



All times are GMT -4. The time now is 06:15 PM.